Importance of ceiling fan
Many people knows that ceiling fan has a special place in family life.In summer, it can bring coolness to every corner of the house, keeping you away from hot troubles.In winter, it can let warmth surround every place in the home, let you say goodbye to the cold invasion.
Therefore, when the pull chain is stuck and cannot work, we must do something to get the ceiling fan back to work.
How to fix
If the pull chain is connected to the switch and the pull chain is stuck, it means that there is a problem with the switch system, so the switch system needs to be replaced.
For your own personal safety, you must turn off the switching power supply. Then start the disassembly of the switch shell.only in this way, you can proceed to the next step.This is also the best way to isolate the power supply, and there will be no other accidents.
Remove the bulb to prevent damage. In order to better reach the ceiling fan, you need to use a step stool or ladder. Unscrew and remove the bulbs, and place them in a safe, soft place for future use. If you have any spheres or wall lights attached to your particular ceiling fan, you can use a screwdriver and easily remove this accessories .
Use a screwdriver to remove the screws holding the fixing device in place so that the switch and wiring can be seen soon. Then make sure you keep all the removed accessories in a safe place for reinstallation later.
Find the switch and take a photo of the switch to confirm the product model that needs to be replaced, so as to facilitate purchase or direct replacement.At the same time, we also need to take a picture of the wires connected to the old switch to recognize the corresponding connection ports of the wires to ensure that the subsequent re-safety and accuracy.
After all the photos are taken, we need to go to the nearby electrical or hardware store to ask the clerk so that we can purchase the correct model of switch and the corresponding model of pull chain, and then go home to prepare for installation.
Before installation, you need to remove the old switch. If you are afraid of forgetting the switch position, you can also take pictures. Then install the new switch, refer to the photos taken for the switch and pull chain installation, so that it can be accurate.
Check the pull chain and switch
Before we reinstall the switch cover and other parts,we need confirm the switch and pull chain can be work well.
We can gently test the pull chain to see if the switch can work normally. If it can, it means that it is installed correctly and can be used with confidence.if it is not, then we need to check again to ensure that it can be used normally.
When it is confirmed that the switch and pull chain can be used normally, we can install the switch cover and other parts one by one to restore the original condition.
Finally words
Ceiling fan is our friend and make us happy in real life.So if ceiling fan had broken,we need check the reason and make ceiling fan can work well.
When ceiling fan not work,don’t have any thinking.Just try to check it and repair it.If you have any demand or question,contact me(QINGCHAGN) in your free time.
Learn more about QINGCHANG products
Post time: Sep-25-2021
